.jpg)
ADEKA for roofing
- Roofing
- Screws
- Hidden
- Overlapping
- ADEKA
- Can be used on a roof slope of 15 degrees
- A diamond aesthetic
- Small preformed elements
.jpg?width=1120)
.jpg?width=1120)
.jpg?width=1120)
.jpg?width=1120)
.jpg?width=1120)
Overview
ADEKA is an innovative patented facade and roof system based on small pre-formed QUARTZ-ZINC or ANTHRA-ZINC elements featuring a unique locking key. For other finishes please contact us.
Structure
ADEKA can be fixed to both vented open gap softwood boards and vented 18mm plywood with VMZINC Membrane.
Drawings
Please find below files containing a selection of drawings. Further drawings are available upon request from your specification manager. Please note these drawings are only relevant for Ireland and UK market.
Areas of application
Due to the raised edges and 50mm overlaps Adeka can be used for roofing for slopes of 15 degrees and over.
Dimensions
| No elements/m2 | 8.8 |
|---|
Finishes
See all aspects-
ANTHRA-ZINC -
AZENGAR -
PIGMENTO Blue -
PIGMENTO Brown -
PIGMENTO Green -
PIGMENTO Red -
QUARTZ-ZINC
Documents and drawings
Please enter your E-mail address. We will send you the download link by mail.
Installation
See all our installation videos-
The panels are installed from bottom up with the key fixing into the lower panel. Each Adeka tile is then secured with 3 screws. Adeka is not supplied with filmed VMZINC. Roofing shingles (flat lock panels) can also be installed on a roof in a similar fashion to the Adeka tile however the minimum slope for the majority of projects using diamond shingles with non-aligned joints is 45 degrees.