ADEKA for roofing
- Roofing
- Screws
- Hidden
- Overlapping
- ADEKA
Advantages
- Aesthetic of diamond shaped
- Aesthetic of transverse line of offset joint
- Fast and easy installation making it a cost effective solution
- Small preformed elements
General information
The ADEKA diamond shaped tile can be installed on roofs as well as facades with slopes of 25% (15°) or more. Less than 10 ADEKA elements are needed to cover 1 sqm and the easy assembly (no mechanical tools necessary) of Adeka makes installation simple.
ADEKA elements are weather resistant thanks to the 5 cm overlap, raised edges at the top, and dropped edges on the bottom, and a polystyrene wedge bonded to the underside of the ADEKA.
Areas of application
Pitched roofs with slopes from 25% (15°) or more and facades.
Technical data
| Packaging | 24.0 |
|---|---|
| VMZSolution.Dimensions.spindleSpindle | 280.0 mm |
| No elements/m2 | 8.8 |
Finishes
See all aspects-
ANTHRA-ZINC -
AZENGAR -
PIGMENTO Blue -
PIGMENTO Brown -
PIGMENTO Red -
QUARTZ-ZINC -
Natural zinc
Installation
See all our installation videos-
Mark out lines on the deck every 56 cm (or 28 cm) at right angles to the baseline. These will be used to line the ADEKA elements up with the alignment guide on each element
Do you have a question or remark?
Please, leave us a message.
;
;