General information

Construction system combining a standing seam roofing in Zinc PLUS with rigid mineral wool insulation laid on supporting structures in steel or wood.


Areas of application

Minimum slope 15° (25%) - All types of buildings : commercial, public buildings,  collective and individual housing.


Technical data

Epaisseur0,70 mm
Longueur développée500 mm
Entraxe fini430 mm
  • ANTHRA-ZINC PLUS
  • PIGMENTO Brown PLUS
  • Natural zinc PLUS
  • PIGMENTO Blue PLUS
  • PIGMENTO red PLUS
  • Clips_STRUC_Roof.jpg

    Steel or timber deck

    This structure is successively covered by:

    A vapour control layer with a high water vapour resistance installed with cold or hot glued joints.

    Insulation: mineral wool. All insulation materials have to resist a compression strenght of minimum 50kPa (0.5kg/cm²), at a maximum 10% deformation. The insulation must have the necessary approvals for use in warm roof applications.

    Between the Zinc PLUS and the insulation, a breather membrane is fixed with an overlap of + 150 mm.

Do you have a question or remark? Please, leave us a message.
;

This site is protected by reCAPTCHA and the Google. Privacy Policy and Terms of Service apply.

;