General information

ADEKA is an innovative patented facade system based on small pre-formed QUARTZ-ZINC elements featuring a unique locking key (other finishes on request). This ingenious easy to install system allows long term weatherproofing for facades.

ADEKA is a complete system which includes a full range of flashings to handle all facade situations. ADEKA is an ideal solution for all sizes of flat facades.

Less than 10 ADEKA elements are needed to cover 1 m2 and the easy assembly (no mechanical tools necessary) of ADEKA improves zinc laying time.


Areas of application

Suitable for both renovation projects and new buildings.


Buildup

Continuous or thinned timber

Technical data

Width 400 mm
Length 400 mm
Thickness 0.65 mm
Packaging 24
Weight 6.9 kg/m²
No elements/m2 8.8
  • QUARTZ-ZINC
  • 1.

    The support must be: Rigid and continuous, Rest on at least 3 bearing structure elements, Have no protruding elements on the support

  • 2.

    ADEKA is laid on 19mm plywood and a separation membrane (i.e. tyvek) should be laid before installing the panel. For 20° - 30° (36% - 60%) roofs use a continuous deck. For roofs steeper than 30° (60%) or facades, ADEKA can be laid on battens with 203 mm centre-to-centre span. The support must be continuous for 40 cm adjacent to special features such as corner or bottom flashing.

  • 3.

    Mark out lines on the deck every 56 cm (or 28 cm) at right angles to the baseline. These will be used to line the ADEKA elements up with the alignment guide on each element.

  • 4.

    Begin laying from the eaves up, folding the locking key under the fold of the eaves flashing.

  • 5.

    Insert the ADEKA element via the locking key into the appropriate grooves made in the lower elements. Then fix each ADEKA onto the wooden deck in the predrilled holes.

Do you have a question or remark? Please, leave us a message.
;

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

;